Inlet pressure 0.3-20 MPa Oil free compressor natural gas filling station
Application:
The natural gas filling staion is used for CNG fueling.
Features:
The natural gas filling station has the below features.
1. The natural gas filling station is suitable for both the pipeline network and trailer tank natrual gas sources.
2. It is not need to change the any parts when switch the source from pipeline to the trailer tank.
3. The CNG filling station can work according to the gas sources condition. So it can save the cost and improve the efficiency.
4. The compressor with low center of gravity,small area occupation and smooth surface.
5. The piston rod produced by high frequency quenching. It has good abrasion resistance,enogh stiffness and strength and long service life.
Technical parameters:
| Iitems | Unit | Parameters | Remark |
| Inlet pressure | Mpa | 0.3 | for pipeline network |
| 2-20 | for trailer tank |
| Outlet pressure | Mpa | 25 | |
| Inlet Temp. | ℃ | <30 | |
| Outlet Temp. | ℃ | ≤45 | after cooling |
| Volume flow | m3/min | 3.65 | for pipeline network |
| 0.29 | for trailer tank |
| Capacity | Nm3/h | 900 | for pipeline network |
| 1200 | for trailer tank |
| Stages | | 4 | for pipeline network |
| switch automatically between 1st and second stage | for trailer tank |
| Control method | | PLC automatical control | |
| Cooling method | | water cooling or water and wind mixed cooling | based on the site condition |
| Motor power | KW | 185 | |
