
Add to Cart
Molecular sieve dehydration and dehydrocarbonation unit for natural gas
Application:
The molecular seive dehydration and dehydrocabonation unit is applied in removing the water and hydrocarbonation in natural gas.
Description:
The molecular seive dehydration and dehydrocabonation unit combine the process of natural gas freezing and molecular sieve dehydration. Design size 1.5 x 104 m3 / d, load range of 30% ~ 100%, after dehydration of natural gas water dew point in the booster station to a maximum of 2.5 MPa pressure, lower than the minimum transportation environment temperature 5 ℃ and above (molecular sieve enabled, the water dew point control in - 5 ℃)..
Water dew point: after dehydration of natural gas water dew point in the booster station to a maximum of 2.5 MPa pressure, lower than the minimum transportation environment temperature 5 ℃ and above.
Technical parameters:
Inlet gas condition | ||
1 | Flow | 1.5X104 Nm3/d |
2 | Inlet Pressure | 1.6-2.5 MPa |
3 | Inlet Temperature | 5-39 ℃ |
Outlet gas condition | ||
4 | Flow | 0.7-1.5X104 Nm3/d |
5 | Outlet pressure | 1.5-2.4 MPa |
6 | Outlet temperature | 29℃ |
7 | Water dew point | <-5℃ |