High performance corrosion inhibitor injection skid for natural gas
Description:
1. Corrosion inhibitor pump remote start, stop and flow regulation.
2. Pump outlet pressure display.
3. Corrosion inhibitor pump status display.
4. Display tank level.
5. Corrosion inhibitor tank body pressure display.
6. Corrosion inhibitor tank fluid level display.
7. There should be enough maintenance room between skid internal equipment.
8. Noise control: the noise generated by the equipment at 1m from the sound source shall not exceed 85dB (A).
9. Valves in skid and pipeline are required to ensure good tightness and wear resistance at the same time.
10.The skid meets the standard requirements of lightning protection and anti-static.(the distribution box, distribution box and other equipment with a ground mark shall be grounded; The door and flange of 4 bolts must be bonded with wire.
11. Equipped with explosion-proof distribution box, starting switch, current and voltmeter with corresponding function on the skid, protection level of distribution box inside the skid is not lower than IP65; Explosion proof grade shall not be lower than dllBT4.
Technical parameters:
| 1 | Flow | 0.002-3 m3/h |
| 2 | Meidum | methyl alcohol, corrosion inhibitor |
| 3 | Injection pressure | 0.3-70 Mpa |
| 4 | Designed pressure | 1.6-100 Mpa |
| 5 | Tank capacity | 1-20 m3 |
| 6 | Designed temperature | -40-100 ℃ |
| 7 | Materials | 16Mn, 20III, 304, 20 |
| 8 | Overall measurement | ≤ 15X3X3.5 m |
| 9 | Weight | 5-35 ton |
